#fget_config -A | -l | -v dar_name
- A Displays output for all the configured dars in the subsystem. If you use this parameter, do not specify a dar name.
- l Displays output only for the dar that you specify.
- v Displays more information about the dar or dars, such as the user array names that were created when you configured the DS4000 subsystem.
example
fget_config -l dar3 command. A dac can be Active, Passive, or Offline. Only dacs that are in Active state are used for I/O. In the output, you can see that dar3 consists of dac6 and dac9
# fget_config -l dar3
dac6 ACTIVE dac9 ACTIVE
hdisk26 dac9
hdisk27 dac6
hdisk28 dac9
hdisk29 dac6
hdisk30 dac9
hdisk31 dac6
hdisk32 dac9
hdisk33 dac9
hdisk83 dac6
fget_config -vl dar3 command. Note that using the -v parameter causes the user array name and LUN names to be displayed:
# fget_config -vl dar3
User array name = ’D59 DS4500 #1’
dac6 ACTIVE dac9 ACTIVE
Disk DAC LUN Logical Drive
utm 10
hdisk26 dac9 1 multipart11
hdisk27 dac6 2 multipart12
hdisk28 dac9 3 multipart13
hdisk29 dac6 4 multipart14
hdisk30 dac9 5 multipart15
hdisk31 dac6 6 multipart16
hdisk32 dac9 7 multipart17
hdisk33 dac9 9 multipart19
hdisk83 dac6 8 multipart18
fget_config -A command. Note that using the -A parameter causes all the dars to be displayed
# fget_config -A
---dar0---
dac3 ACTIVE dac0 ACTIVE
hdisk4 dac3
hdisk5 dac0
hdisk6 dac3
hdisk7 dac0
hdisk8 dac3
hdisk10 dac0
hdisk11 dac3
hdisk12 dac0
hdisk13 dac3
hdisk14 dac0
---dar1---
dac1 ACTIVE dac4 ACTIVE
hdisk15 dac1
hdisk16 dac1
hdisk17 dac4
hdisk18 dac1
hdisk19 dac4
hdisk20 dac1
hdisk21 dac4
hdisk22 dac1
hdisk23 dac4
hdisk24 dac1
---dar2---
dac2 ACTIVE dac5 ACTIVE
hdisk25 dac5
---dar3---
dac6 ACTIVE dac9 ACTIVE
hdisk26 dac9
hdisk27 dac6
hdisk28 dac9
hdisk29 dac6
hdisk30 dac9
hdisk31 dac6
hdisk32 dac9
hdisk33 dac9
hdisk83 dac6
fget_config -Av command. Note that using the -v parameter causes the user array names and the LUN names to display:
# fget_config -Av
---dar0---
User array name = ’D59S Flute-2
(DS4500) #1’
dac3 ACTIVE dac0 PASSIVE
Disk DAC LUN Logical Drive
hdisk4 dac3 0 dualpart0
hdisk5 dac3 1 dualpart1
hdisk6 dac3 2 dualpart2
hdisk7 dac3 4 dualpart4
hdisk8 dac3 5 dualpart5
hdisk10 dac3 8 dualpart8
hdisk11 dac3 9 dualpart9
hdisk12 dac3 10 dualpart10
hdisk13 dac3 11 dualpart11
hdisk14 dac3 12 dualpart12
---dar1---
User array name = ’D59 DS4500 #1’
dac1 ACTIVE dac4 ACTIVE
Disk DAC LUN Logical Drive
utm 10
hdisk15 dac1 0 multipart20
hdisk16 dac1 1 multipart1
hdisk17 dac4 2 multipart2
hdisk18 dac1 3 multipart3
hdisk19 dac4 4 multipart4
hdisk20 dac1 5 multipart5
hdisk21 dac4 6 multipart6
hdisk22 dac1 7 multipart7
hdisk23 dac4 8 multipart8
hdisk24 dac1 9 multipart9
---dar2---
User array name = ’D59S DS4500 #2’
dac2 ACTIVE dac5 ACTIVE
Disk DAC LUN Logical Drive
utm 31
hdisk25 dac5 0 1
---dar3---
User array name = ’D59 DS4500 #1’
dac6 ACTIVE dac9 ACTIVE
Disk DAC LUN Logical Drive
utm 10
hdisk26 dac9 1 multipart11
hdisk27 dac6 2 multipart12
hdisk28 dac9 3 multipart13
hdisk29 dac6 4 multipart14
hdisk30 dac9 5 multipart15
hdisk31 dac6 6 multipart16
hdisk32 dac9 7 multipart17
hdisk33 dac9 9 multipart19
hdisk83 dac6 8 multipart18
이 글은 스프링노트에서 작성되었습니다.
'IBM > storage' 카테고리의 다른 글
| H194697_SATA_drive_hangs_or_is_not_ready_after_pow (0) | 2012.11.09 |
|---|---|
| [기술문서/FAQ] CIFS의 최대 접속가능한 세션 갯수는? (0) | 2012.11.09 |
| storagemanager_port정보 (0) | 2012.11.09 |
| fget_config명령 (0) | 2012.11.09 |
| acess LUN (0) | 2012.11.09 |
| [기술문서/FAQ] CIFS의 최대 접속가능한 세션 갯수는? (0) | 2012.02.07 |
| DS8K 복제솔루션 자료 (0) | 2011.11.08 |
| DS8K Online Manual (0) | 2010.08.09 |
| DS8000 Terms and Concepts (0) | 2010.08.09 |
| Where are the LUN numbers on a DS8000? (0) | 2010.08.09 |